High Pressure Suspension Grinding Mill
YGM Grinding Mill (High Pressure Suspension mill) is mainly made up of the mainframe, separator, blower, finished powder cyclone collector, bag filter and connecting pipes, etc.
YGM series high pressure suspension mill is mainly suitable for process various non-flammable, non-explosive ore materials with mohs hardness below 9.3 and humidity below 6%, such as metallurgy, construction materials, chemicals, ores, highway construction, hydroelectrical subjects and so on. Meanwhile, it’s an optimum equipment for processing Quartz, feldspar, calcite, limestone, talc, ceramics, marble, granite, dolomite, bauxite, iron ore and barite, bentonite, gangue, coal and so on. Fineness of final products should range from 0.613mm to 0.033mm.
Features of high pressure suspension mill
1.Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). And a few of material powder can reach 0.013mm (1000 mesh).
2.Compared with the common Raymond grinding mill under the same power conditions, the capacity can be increased by 10%; moreover, under the performance of high-pressure springs, the rollers grinding pressure on raw materials can be raised by 800-1200kgf..
3.The dust-removing effect can fully conform to the national standard.
4.The final product size ranges from the maximum particle diameter of 0.613mm (30mesh) to the finest diameter of 0.033mm (425 mesh). A few materials can reach 0.013mm (1000 mesh).
5.All the mineral materials with Mohs hardness below 9.3 can be crushed.
6.The grinding device adopts a superposition multi-grade sealing with good sealing performance.
7.The grinding equipments adopt lapping multilevel seal, which is very effective.
8.The change period of roller and ring is long.
9.Its dust-removing effect fully meets the national dust discharge standard.
Application of High Pressure Suspension Mill
MTM Medium Speed Trapezium Grinding Mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, and mining, etc. The MTM Medium Speed Trapezium Grinding Mill can produce powder from non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as barite, limestone, quartz, calcite, granite, porcelain clay, basalt, gypsum etc. The final sizeof the powder is between30—400mesh. Fully considered the needs of desulfurization, MTM Medium Speed Trapezium Grinding Mill could perfectly work with desulfurization equipments to increase the efficiency of desulfurization. So it is the best choice of desulfurization.
|Application:||metallurgy,building materials,chemical and mining|
|Capacity||Up to 9.5TPH, capacity depends on the size of fineness|
|Max feeding size:||≤30mm|
0.033-0.613mm (Mm to mesh conversion: 25.4mm=1in.)
|Feed Material:||non-inflammable and non-explosive materials with Mon’s hardness below 9.3 and moisture content below 6%|
|Apply for production plant:||Grinding production plant|
|Durability:||Depends on the hardness and humidity of feed material and other factors.|
|Certification:||ISO 9001:2000, CE, National Patent Certification|
|Guarantee:||One year (excluding easy-worn parts)|
High Pressure Suspension Mill Working principle
In the mainframe of High Pressure Suspension Mill, there are strong springs with pressure as high as1000-1500 kg equipped on the roller suspender. When it works, the roller rotates around the principal axis, and clings to ring under the effect of the strong spring and eccentricity. When the materials are sent into the grinding chamber, they are brought to the space between the roller and ring and get grinded. Then the powder grinded will be blown into separator. The fine powder after departed with the air is discharged through the outlet as final product. The large-sized powder falls back for regrinding. The air will be back to the blower for repetition of the above process. The left air will come to the bag filter to get cleaned. When the wear and tear between roller and the ring reaches certain degree, adjust the length of the strong spring, so to keep the invariable pressure between the roller and the ring, to make sure the stable production and the fineness.
Technical Data of High Pressure Suspension Mill
Mm to inch conversion: 25.4millimeters=1 inch
Mm to mesh conversion: 25.4mm=1in.
The humidity and hardness of raw materail will affect the fineness and capacity.
|Model||Piece of roller||Size of the roller (mm)||Size of the ring (mm)||Feed size(mm)||Fineness of powder (mm)||Capacity (t/h)||Motor power (kW)||Weight (without motor)(t)|
1. Based upon limestone-grinding with 80% pass-through;
2. The final technical data are subject to the operation manual along with the machine.
Note: Any change of High Pressure Suspension Grinding Mill technical data shall not be advised additionally.